>> TACTICAL

TACTICAL

MCS-T1

The MCS-T1's standard weight is 3.4 lbs, but can be had as light as 2.4 lbs and as heavy as 5 lbs. The forend is 1.78" wide at the tip and will take barrels up to 1.350 inches in diameter. It comes standard with a high cheekpiece and an adjustable spacer type butt system, with a 1/2" Pachmyer Decel pad. It also has a butt hook that can be used to ride the bags or control the rifle with your non-trigger hand. Rem 700 s/a is the standard inlet but others can be special ordered.

MCS-T50

The MCS-T50 is our new 50bmg thumbhole tactical stock. This stock was designed for the new 1000 yard FCSA prone class. It features a fully adjustable 3 way butt pad system and a 2 way cheekpiece system. The cheekpiece is designed for quick removal for cleaning, but at the same time giving the bolt plenty of clearance to operate. The barrel, action, magazine, and trigger areas are molded into the shell of the stock. The only cuts in the shell are the bolt handle and pillar holes done during the bedding process. The forend is longer than most 50bmg stocks for more stability, but not too long to affect the amount of swing on the moving target. The standard weight is 5.5 lbs but can be had as light as 4.5 lbs. The MCS-T50 comes in right hand only, with a small swell on the left side for your thumb. The forend is 2.9" wide at the tip and has straight vertical sides and a flat bottom. It also has a butt hook that can be used to ride the bags or controlling your rifle with your non-trigger hand. The standard inlet is the Mcbros 50 BMG action in single shot, repeater, RP and LP, but others can be special ordered.

MCS-T2 and T2A

The MCS-T2 comes in two versions: the T2A, which has an adjustable cheek and the T2 that is non adjustable. The T2A comes standard with an adjustable cheek and Terry Cross' hardware. Both come standard with a fixed 1"Pachmyer Decel pad. It can also be ordered with the optional butt spacer system and a Decel pad. The standard weight for the T2A is 3.9 lbs. And the T2 is 2.6 lbs. The forend is 2.40" wide at the tip and will take barrels up to 1.350 inches in diameter. A lot of work went into the design of the back of the stock. It has a flat that is about 3/4" wide on the bottom with true running sides. This allows the stock to ride very straight and true when using a rear bag.

MCS-T4A and T4

The MCS-T4 comes in two versions: the T4A, which has an adjustable cheek, and the T4 which is non adjustable. The T4A comes standard with an adjustable cheek and Terry Cross' hardware. Both come standard with a fixed 1" Pachmyer Deel pad. They can also be ordered with the optional butt spacer system and a 1/2" Decel pad. The standard weight for the T4A is 4.2 lbs, and the T4 is 2.8 lbs. The forend is about 2.50" wide and will take barrels up to 1.350 inches in diameter. The sides and bottom of the forend and the bottom of the butt behind the hook are parallel with the bore. This allows the stock to ride very straight and true if you want to use bags. The forend of the stock is only textured on the back half and we lengthened the pistol grip about 1/4" longer compared to the T2 stock.

MCS-T3

This is one of our new designs. It is a good all round hunting/tactical stock. The standard weight is 2.6 lbs but can be had as light as 2.2 lbs. The forend is 2.40" wide at the tip and will take straight taper barrels up to 1.350 inches in diameter. The MCS-T3 comes standard with a 1" Pachmyer Decel pad installed at a length of pull at 13.5". This stock has a high cheekpiece and a nice palm swell, and a little longer grip than the MCS-T stock. The forend and palm swell feature a light molded texture.

MCS-TA and T

This is our more traditional hunting/tactical stock. It comes in two different versions: the MCS-T fixed cheek version and the MCS-TA adjustable cheek version with Terry Cross hardware. The standard weight of the fixed cheek version is 2.5 lbs but with the 90% carbon fiber option it usually ends up around 2.1 lbs. The standard weight of the adjustable cheek version is 3.4 lbs. The forend is 1.75 wide at the tip and rounded to a beaver tail that is flat. The forend is also wide enough to accept a #8 barrel which is about 1.123" diameter at the tip of the stock. The MCS-T and TA comes standard with a 1" Pachmyer Decel pad installed at a length of pull at 13/5". This stock has a high cheekpiece and a nice palm swell. The forend and palm swell feature a molded in textured surface for a sure grip. Rem 700 s/a is the standard inlet but others can be special ordered.

TACTICAL Accessories

Select from the list of accessories for this product below:

Sorry - There are no accessories listed yet for this product.